Version 128 - 10/20/13 - Fixed RTP timestamps. Version 126 - 02/05/13 - Fixed HDMI input. Version 125 - 08/15/11 - Enhanced encoder error handling. Version 124 - 07/28/11 - Disabled TBC mode. Version 123 - 07/02/11 - Corrected sdi diagnostic print out. Check for correct system before installing updates. Version 122 - 06/21/11 - Added support for composite B/W input. Version 121 - 04/19/11 - Added KLVA descriptor for metadata. Version 120 - 04/18/11 - Added ability to turn off UDP genlock. Version 119 - 04/13/11 - Fixed PAL-N composite input. Version 118 - 04/05/11 - Fixed setting level to 2.0 and 3.0. Version 117 - 03/27/11 - Added TS Packet metadata from UDP input. Version 116 - 12/14/10 - Fixed 1080i50 bit rate setting. Version 115 - 12/10/10 - Fixed decoder stalling. Version 114 - 12/06/10 - Added HDMI 480i encode. Version 113 - 12/03/10 - Removed NTP Time update interval. Update now occurs every five minutes. Added support for dual encode of D1 and CIF on QVAVC-HD for SD/SDI and Composite input. System reboots when the video process does not properly terminate. Version 112 - 11/20/10 - SOC Firmware 20100202 6.2.0.84 Version 111 - 11/08/10 - Changed ARQ's default values. Version 109 - 10/08/10 - Changed decoder's default video buffer to 300ms. Version 108 - 09/14/10 - Added support for SECAM input on composite input. Version 107 - 09/01/10 - Added support for composite and S_video PAL-N output. Version 106 - 08/02/10 - SOC Firmware 20100601A 6.2.0.88 Added support to resize HD to SD and CIF for encoding. Remove spurious encoder SNMP trap messages. Added support for composite and S_video PAL-N input. Added addional error handling for encoder. Version 103 - 06/18/10 - Fixed on screen stats for RTP input. Recompile with correct flags. Version 102 - 06/02/10 - Added ability to set 'Detect Video Break' value. Version 100 - 05/12/10 - Improvements to sdidiag. Version 98 - 05/09/10 - Added ability to use same UDP port for ARQ and data. Version 97 - 04/21/10 - Fixed SNMP video present bug. Version 96 - 04/19/10 - Added ability to select program when transcoding. Version 95 - 04/14/10 - Enabled encoder and transcoder to output to DNS hostnames. Fixed importing profile bug. Added Closed Caption for SD video for encoder. Version 94 - 03/21/10 - Video break detection now checks for PCR changes. Version 93 - 03/18/10 - Added Constant Quantization MPEG2 transcode option Added video break detection for transcoder network input and network output (does not work for ASI output). Version 92 - 03/16/10 - Added Constant Quantization MPEG2 encoding option to Video Encoding parameter. Version 91 - 03/16/10 - Use 20100204 Libraries. Added video break detection for decoder network input. Version 90 - 03/06/10 - Added Half Video frame resolution to Encoder Profile. Version 89 - 02/26/10 - Use 1208 Libraries. Version 87 - 02/23/10 - Use different ARQ Rx Module to support 4 Mbps video. Enabled bitrate smoothing. Version 86 - 02/18/10 - Added ASI input for decoder. Version 85 - 02/07/10 - SOC Firmware 20100202 6.2.0.84 Fixed bug in SDI audio not being selected properly. Version 84 - 02/06/10 - Fixed hostname not being saved to flash. Fixes hostname being set when rebooted. Version 83 - 02/01/10 - Added Constant Quantization H264 encoding option to Video Encoding parameter. Version 82 - 01/29/10 - Fixed AC3 pass through when transcoding Version 81 - 01/20/10 - Double start decoder when video resolution changed detected. Added LinkUp, LinkDown and ColdStart SNMP Traps. Version 80 - 01/15/10 - Fixed bug in decoding PAL H264. Version 79 - 01/07/10 - Fixed analog audio volume not being set for HD Video. Added option to turn on/off video resolution changed detection in decoder. Added ability to transcode 1920x1080 to 1440x1080 Version 78 - 01/02/10 - SOC Firmware 20091208 6.2.0.82 Added video resolution changed detection check in decoder Version 77 - 12/28/09 - Fixed decoder not working if it was started before encoder. Version 76 - 12/15/09 - Added SNMP Traps for video input signal for encoder and network input for decoder. Version 75 - 12/03/09 - Fixed ASI output when encoding. Version 74 - 11/29/09 - Added support for bi-directional ARQ. Version 73 - 11/28/09 - SOC Firmware 20091117 6.2.0.81 Added Secure HTTP (port 443) Added out of order buffer. Version 71 - 11/23/09 - SOC Firmware 20090817 6.2.0.68 Reset analog audio when being used with HD. Version 70 - 10/29/09 - Fixed Encoder stats. Version 69 - 10/27/09 - Fixed HDMI reset. Added ability to: Change admin user password. Disable SSH root login. Set SSH port. Version 66 - 10/23/09 - SOC Firmware 20090916 6.2.0.71 Fixed encoder restart problem. Version 64 - 10/14/09 - Fixed bug in 720p settings. Version 63 - 10/05/09 - Fixed bug in Decoder profile WEB UI. Fixed bug in pacing for UDP. Version 61 - 09/28/09 - Added SDI input reset. Added support for mono audio. Added pacing setting to Encoder Profile. Version 60b- 09/21/09 - Fixed "Analog audio input for HD Video" setting. Version 60a- 09/14/09 - Subtitles are now pass through when transcoding. Added multiple stream encoding for SD model. Version 58 - 09/04/09 - Added MPEG4 Profile and Level to encoder profile. Version 57 - 08/31/09 - Added ability to change video bitrate while encoding. Version 56 - 08/25/09 - Added ability to set the analog audio gain and attenuation. Digital audio input from SDI and HDMI is not affected. Version 54 - 08/20/09 - Added video size for fix audio break underflows. Version 52 - 08/18/09 - Set multicast TTL to 32 (was 1). Version 51 - 08/17/09 - Improved ARQ Tx performance for sending higher bitrates to QVidium ARQ Rx proxy. Version 50 - 08/11/09 - Fixed log filesystem from filling up. Version 48 - 08/02/09 - Added the following: Support for analog audio input for HD video. Ability to set audio sample rate for composite or S-Video input. RTSP output to Encoder. Encoder Low Delay mode. Fixed the following: Transcode stats. S-Video CIF and half-frame rate. Version 45 - 07/20/09 - Added support for network bonding. Version 41 - 07/07/09 - Fixed HD video bitrate. Version 40 - 07/03/09 - Fixed Codec Manager Deamon not restarting Version 38 - 06/28/09 - Added the following: Disable WEB in Web UI Disable Ping in Web UI Multicast config in Web UI Defaults for Encoder Profile Defaults for Decoder Profile Defaults for Transcode Profile 'web' program to restart Web LAN2 daemon to configure port when connected (Needs new Kernel) Fixed the following: DHCP for both LAN ports Version 37 - 06/26/09 - Added ability to change passwd from web UI. Improved usability of Encoder Profile web UI. Added ability to set the I and B frames. Version 36 - 06/21/09 - Use tmp filesystem for logs. Added check for HD MPEG2 encode (not supported). Check for SD only for web UI. Version 35 - 06/19/09 - Fix bug for PAL and 1080i50 video. Added ability to enable/disable video filtering when encoding. Added ability to disable/enable ssh and telnet logins. Added ability to set the PMT, PCR, Video and Audio PIDs when encoding. Version 33 - 06/14/09 - Check for valid video input before starting encoder. Added stats to network input and output. Fixed analog video decoder reset. Version 29 - 06/08/09 - Updated HDMI output with latest firmware. Version 28 - 06/06/09 - Updated to latest firmware. Version 27 - 06/01/09 - Fixed pacing for low bitrate streams. Version 01 - 10/27/08 - Alpha version.