Ver 279 - 02/23/19 - Fixed 708 Captions on SDI output Ver 278 - 12/22/17 - Added watchdog to ssh tunnel. Allow entering encoder stream bit rate like 10M. Traceroute fix. Prompts before deleting logs. Ver 277 - 01/27/17 - Added Halt to Web GUI. Ver 276 - 01/16/17 - Added SSH Tunnelling. Ver 275 - 12/06/16 - Fixed Elapsed time Status. Fixed booting when network drive is not accessible. Added low delay H264 elementry streaming to QVidium DirectShow Virtual Video Capture Source Added low delay H264 elementry streaming using Temporal Stream Redundancy (TSR) Ver 273 - 03/20/16 - Added support for QVMS. Added support for two audio streams for IP to ASI. Ver 272 - 03/18/16 - Added "Expected Stream Bit Rate" to decoder profile. Ver 269 - 01/09/16 - Added ARQ and CDN output to encoder. Ver 268 - 12/22/15 - Added ability to set network ceiling bitrate while setting encoder bitrate. Ver 267 - 12/16/15 - Fixed ASI to IP pass-through Ver 266 - 11/25/15 - Added support for File to ASI transcoding. Added support for CDN Ver 265 - 03/06/15 - Fixed ceiling bitrate for encoder "SD-SDI Bitrate" setting. Added 1080p25 output to decoder. Ver 264 - 10/10/14 - Fixed SDT table in encoder. Ver 262 - 10/07/14 - Added support for CodecManager on MacOS and Linux. Fixed Line21 CC on QVPro's SDI output. Ver 261 - 09/09/14 - Disabled root login from Web UI. Resync SDI to No logs "SDI Loss lock" messages. Ver 260 - 08/29/14 - Disabled root login from telnet and ssh. Ver 259 - 08/28/14 - Fixed audio buffer underflow check on decoder. Ver 258 - 07/11/14 - Added hotplug support for USB LCD. Fixed decoder stats for http input. Ver 257 - 06/02/14 - Fixed printing logs with timestamp. Ver 256 - 05/28/14 - Added decoder profile "Check Audio Buffer" setting. Ver 255 - 05/27/14 - Decoder reset leaves last image on screen. Ver 253 - 05/22/14 - SP5942-2014-05-22 Added genlock for IP to ASI Transcode. Improved CC output for MPEG2 input on QVDec. Ver 252 - 04/27/14 - Added check in encoder for RTMP connection. Added check in decoder for RTMP/RTSP/HTTP server. Added File System Type to Remote Directory GUI. Ver 251 - 03/17/14 - Added ability to decreased overhead for audio in encoder. Fixed bug when playing back audio only file when Program set to 0 in decoder. Ver 250 - 03/15/14 - Fixed video only play back in decoder. Added file name and file overwrite setting to encoder. Changed freqency of NTP Time server updates. Enhanced logging. Ver 249 - 03/12/14 - Fixed time stamp in System Log. Ver 248 - 03/11/14 - Added Network Program Stream output on Encoder. Added Syslog Conf menu to enable/disable System Log. Added GUI for optional Firewall package. NOTE: Optional Firewall package requires kernel 247 or greater. Ver 247 - 03/04/14 - Added TOS setting to Encoder profile. Added auto sensing SDI bit rate for Encoder. Added SDT Table to Encoder. Set multicast TTL to 32 for UDP optional output for ARQ mode for Encoder. Fixed network bursty output on LAN2 on Encoder. Added experimental Dynamic Bitrate contol to Encoder. Removed Pacing menu on Encoder. Added experimental Bandwidth Ceiling to Encoder. Added "stopped" and "waiting for input" images for Decoder. Added HTTP server mode for Decoder. Added support for youtube access for Decoder. Ver 246 - 01/11/14 - Increased size of Stream Name to 48 characters. Ver 245 - 01/06/14 - Fixed SDI watchdog. Ver 244 - 12/16/13 - Fixed audio underflow on decoder. Ver 242 - 12/02/13 - SP5584-2013-12-02 - Fixed encoder not stopping for 4 channel audio input. Ver 241 - 11/22/13 - Fixed program number selecion for file playback. Ver 240 - 11/17/13 - Fixed 1080psf24/23.98 input on encoder. Ver 239 - 11/12/13 - Added Encryption Password to Rx Proxy profile. Ver 237 - 11/10/13 - Fixed RTMP server startup. Ver 236 - 11/09/13 - Added PCR Correction to Rx Proxy Menu. Ver 235 - 11/05/13 - Added URI and Strean Name for RTMP outgoing streams. Ver 234 - 10/27/13 - SP5529-2013-10-24 - Fixed QVEnc 708/608 digital captions. Fixed using ARQ and NTP time server together. Ver 232 - 10/16/13 - Added VGA and QVGA video resolutions to encoder. Fixed embedded audio detection. Ver 231 - 10/13/13 - Fixed ARQ Proxy scripts. Added ability to set program number for file playback. Added ability to playback files with suffixes: mpeg, mpg, flv, m2t, mov, 3gp, m4v, m2v, wmv, and 3g2 Ver 228 - 07/17/13 - Fixed encoder bursty network output, requires kernel 228 or later. Fixed 100Mbps and 1Gbps swapping Ethernet problem. Fixed RTP timestamps on encoder ProMPEG FEC streams. Ver 227 - 07/01/13 - Added ability to set audio language descriptors. Ver 226 - 06/16/13 - Added Line21 CC to SDI output Added ANC Data options to QVEnc Encoder profile's Closed Caption setting. Added ANC Data options to QVDec Decoder profile's Closed Caption setting. Added Audio PID (Ch 3/4) setting to encoder profile. Added RTSP and RTMP input for decoder. Ver 222 - 04/28/13 - Added work around for networks that change RTP sequence number 0xffff to 0x0000 Ver 221 - 04/19/13 - Added AES128 encryption. Ver 218 - 04/04/13 - Added support for PAL-M input on QVSD and QVEnc. Ver 217 - 03/27/13 - Fixed analog audio input with SDI input on QVEnc. Ver 216 - 03/24/13 - Fixed bug in ARQ Rx. Ver 215 - 03/18/13 - Use Line 21 for CC on QVEnc model. Ver 214 - 03/13/13 - Fixed Decoder Monitor Web page not refreshing itself. Fixed video only mode. Ver 213 - 02/21/13 - Fixed low delay mode. Ver 212 - 02/19/13 - Added EvoStream server. Ver 207 - 01/30/13 - Added URLs to control decoder. Added decoder genlock setting. Ver 206 - 01/11/13 - Changed QVDec BoardID to 1400. Ver 205 - 01/07/13 - Fixed AC3 input on QVEnc. Ver 203 - 01/04/13 - Added AC3 SDI output for QVDec. Fixed Rx Proxy auto measurement disabled in verion 197. Ver 202 - 01/03/13 - Added AC3 SDI input for QVEnc. Fixed genlock settings for decoder. Fixed multicast output for decoder UDP output. Fixed importing profiles for Chrome web browser. Ver 201 - 12/30/12 - Added 6dB attentuation analog audio setting to encoder profile for QVSD and QVEnc. Ver 200 - 12/29/12 - Fixed setting analog volume when starting encoder on QVEnc. Ver 199 - 12/23/12 - Added audio offset setting to decoder. Ver 198 - 12/20/12 - Check for Level B 3G signals and convert them to Level A. Ver 197 - 12/16/12 - Added IP source filtering on decoder. Ver 196 - 12/07/12 - Cleanup Web menus for QVENC and QVDEC models. Ver 195 - 12/02/12 - Fixed setting stream bitrates larger than 20Mbps. Ver 194 - 11/29/12 - Fixed 480i SDI output on QVDEC. Ver 193 - 11/27/12 - Added AC3 input for S/PDIF for QVENC encoder. Changed default low delay rate control algorithm to PVR. Ver 192 - 11/16/12 - Changed default low delay rate control algorithm to Live. Added Low Delay DTS delay from PCR encoder field. Ver 191 - 11/16/12 - Fixed /disk log. Ver 190 - 11/16/12 - SOC_SDK_XC4200Series_BETA_9A_SP12 Ver 189 - 11/04/12 - SOC_SDK_XC4200Series_BETA_9A Ver 188 - 10/23/12 - Fixed decoder playback for PAL. Ver 185 - 10/12/12 - Fixed decoder playback for NTSC. Ver 184 - 10/06/12 - Added support for 1080p25 SDI input. Ver 181 - 09/19/12 - Added support for 1080p30 and 1080p29.97. 1080p supported only for SDI input. Encoder outputs 1080p29.97 for 1080p30 input. Encoder outputs 1080p23.98 for 1080p24 input. Ver 180 - 09/06/12 - Fixed pacing for CBR output on transcoder. Allow auto reboot without time server. Ver 179 - 09/04/12 - Fixed pacing for CBR output on encoder. Fixed detection of QVSD board. Ver 178 - 08/16/12 - SOC_SDK_XC4200Series_BETA_8F_20120622_SP3 Ver 177 - 08/13/12 - Added network routes web page. Added ARQ stats for ASI to IP. Ver 175 - 07/27/12 - Added QCIF resolution to encoder profile. Ver 174 - 07/25/12 - Added ability to use 8775 HDMI input for QVPro. Ver 173 - 07/10/12 - Fixed 576i output on SDI. Ver 172 - 07/08/12 - Fixed setting analog video for QVSD and QVEnc. Ver 171 - 07/05/12 - Added analog audio input for SDI input on QVEnc model. Added S/PDIF audio input for QVEnc model. Ver 170 - 07/05/12 - Increased size of IP destination field on encoder profile. Ver 168 - 06/20/12 - Added 1080p24 and 1080p23.98 output for decoder. Added 1080p24 and 1080p23.98 SDI input for encoder. Ver 166 - 06/12/12 - SOC_SDK_XC4200Series_BETA_8D_20120605 Ver 163 - 06/11/12 - Fixed watchdog. Ver 160 - 05/30/12 - Added simultaneous Network and File output for encoder. Added simultaneous UDP and ARQ output for encoder. Allow bi-directional temporary license. Ver 157 - 05/28/12 - Fixed bug when setting the ARQ and UDP port to the same value. Ver 155 - 05/24/12 - Added support for audio only for QVSD. Ver 153 - 05/17/12 - SOC_SDK_XC4200Series_BETA_8B_20120503 IP to ASI transcode does not work on QVPro. Ver 150 - 05/11/12 - Added ability to select program on decoder. Added 4 channel audio output for ASI input. Ver 149 - 05/07/12 - Added 4 channel audio input. Added 4 channel audio output for IP input. Ver 146 - 04/24/12 - Added HDMI unplug detection. Added encoder dynamic video output resolution. Ver 143 - 04/20/12 - SOC_SDK_XC4200Series_RC10_20120410 Ver 142 - 04/19/12 - Fixed HDMI input resetting. Ver 141 - 04/12/12 - Enabled Bi-directional for QVPro model. SOC_SDK_XC4200Series_RC8_20120307 Ver 137 - 03/31/12 - Added auto bonding LAN1 percentage. Added change_profile.cgi script. Ver 135 - 03/28/12 - Added standby feature for ASI output. Ver 133 - 03/26/12 - Removed SP4000b to fix IP to ASI transcode for MPEG2. Creating MP4 files to NTFS is not supported. Ver 132 - 03/24/12 - Fixed IP to ASI transcode for H264. Ver 129 - 03/12/12 - Added ASI to IP pass-through. Added ProMPEG to IP output. Ver 128 - 02/26/12 - Added basic encoder web page. Ver 127 - 02/15/12 - SP4000b-2012-02-15 Fix for creating MP4 files to NTFS. Ver 121 - 02/10/12 - Added IP Source to Multicast input on Decoder profile. Ver 120 - 02/06/12 - Added "Max File Size" to encoder. Ver 118 - 01/30/12 - Added Half frame rate to Transcoder. Ver 117 - 01/24/12 - Generate an IDR picture in every GOP. Ver 115 - 01/22/12 - Added Stream Mode VBR vs. CBR Ver 113 - 01/20/12 - SP3886-2012-01-04 Added pacing by PCR. Ver 112 - 01/15/12 - Added support for SMB/CIFS and NFS file systems. Fix to mount NTFS drives read-writeable. Prevent LAN1 and LAN2 from being on the same subnet. Ver 109 - 12/17/11 - Low latency decode. Ver 106 - 12/12/11 - BETA_7G_20111122_A21 plus SP3820-2011-12-08 Ver 104 - 11/30/11 - Added support for video only streams for decoder. Ver 103 - 11/25/11 - Added support for dual encode for SD video input. HDMI input is not supported for dual encode. Ver 101 - 11/17/11 - Fixed crash when playing back MP4 file. Ver 100 - 11/17/11 - New xcode4drv.ko device driver for Closed Caption. Ver 99 - 11/15/11 - Added USB web menu. Ver 98 - 11/13/11 - Added Decoder Error Handling. Added "USB TS" and "USB MP4" to encoder profile. Ver 96 - 11/10/11 - Enabled Closed Captions for only NTSC input signals. Ver 95 - 11/09/11 - Added 15 second holdoff for Decoder ASI input error detection. Ver 94 - 11/08/11 - Added error handler setting for transcoder IP output. Fixed 1080p50 encoding. Ver 92 - 11/07/11 - Added ability to send only video or only audio for encoder. Ver 91 - 11/03/11 - Fixed closed captions on encoder. Ver 90 - 11/02/11 - Changed decoder's default video buffer from 150 to 500 ms. Disabled decoder reboot on stalled video for IP Input. Ver 87 - 11/01/11 - Added frame counter monitor for decoding ASI input. Set transcoder IP output to reboot on error. Fixed CBR pacing for transcoder IP output. Ver 85 - 10/30/11 - Enabled decoder deinterlacer for progressive output. Ver 84 - 10/29/11 - Improved pacing for CBR streams. Ver 82 - 10/25/11 - BETA_7D_20111020_A21 Ver 81 - 10/25/11 - Added 3/4 HD and 1/2 HD encode capability. Ver 80 - 10/23/11 - Added ability to set P and B frames for transcoder Ver 77 - 10/14/11 - BETA_7A_20110926_A21 Ver 73 - 09/30/11 - Added support to save incoming and outgoing network streams to USB drive. Ver 72 - 09/25/11 - Added RTMP output on encoder. Ver 71 - 09/19/11 - BETA_5A_20110707_A21_SP14 ASI output is supported. CBR output is supported PAL output on composite is supported Dynamically changing video bit rate is supported Added memory dump functions. Ver 70 - 08/18/11 - BETA_5A_20110707_A21_SP5 ASI output not supported. SDI output supported. CBR output not supported (Using Middleware SDK). Ver 69 - 08/18/11 - BETA_4A_20110408_A21_SP2 Fixed bug in watch dog. ASI output works. SDI output not supported. Ver 67 - 08/16/11 - Add scheduled auto reboot. Added watchdog web UI. Ver 66 - 08/11/11 - BETA_5A_20110707_A21_SP5 Enabled interlaced output on SDI. Enable system watchdog. Ver 65 - 08/07/11 - Added stream bit rate to transcode profile. Ver 64 - 08/01/11 - Disabled graphics. Ver 63 - 07/30/11 - BETA_5A_20110707_A21_SP2 Ver 61 - 07/28/11 - Changed PCR, PAT and PMT intervals. Ver 60 - 07/26/11 - Use RMXSDK for encoding. Ver 59 - 07/22/11 - BETA_5A_20110707_A21 Supports CBR MPEG2 transport stream output over IP. Use Middleware (not using RMXSDK for encoding) ASI output not supported. Ver 58 - 07/19/11 - BETA_4A_20110408_A21_SP2 Fixed video jitter in composite input. Ver 56 - 07/14/11 - BETA_5A_20110606_A21 Ver 55 - 07/02/11 - Check for correct system before installing updates. Ver 54 - 07/01/11 - Corrected sdi diagnostic print out. Ver 53 - 07/01/11 - Set peak video bitrate to 150% of video bitrate. Ver 52 - 06/30/11 - BETA_4A_20110408_A21_SP2